Equipment technical data: Single furnace rated capacity: 30 tons • aluminum;
Maximum capacity of a single furnace: 31 tons of aluminum;
Melting furnace+combustion system footprint size: (length * width * height) 6 * 7 * 6 meters; Single furnace natural gas parameters: DN50 for workshop main pipeline, 0.1-0.2MPA. Reserved port parameters near the equipment: adjustable from 5-15kpa, flow rate of 400 cubic meters per hour. Gas pipeline parameters: DN50 diameter. Pressure 0.1-0.2MPA, flow rate 800 cubic meters per hour, circulating water 10 cubic meters per hour per casting machine. 8 cubic meters of compressed air per hour.
Description of refractory materials for melting furnace: ⑴ Furnace wall (refractory material thickness 550mm): insulation fiber board+refractory fiber blanket+insulation brick+anti-seepage pouring layer+refractory layer (high alumina brick); ⑵ Furnace bottom (refractory material thickness 550mm): insulation fiber board+refractory fiber blanket+insulation brick+anti-seepage pouring layer+refractory layer (non stick aluminum pouring parts for the melt pool); ⑶ Furnace top (low cement pouring material thickness 350mm): low cement pouring parts+insulation pouring parts;
Rated melting efficiency: 4 tons of aluminum per hour; Natural gas energy consumption is 100 ± 10 cubic meters per ton of aluminum;
DN65; Natural gas indicators: The natural gas usage pressure can be adjusted from 0-15kpa; Natural gas flow rate: 400 cubic meters per hour; Reserved pipe opening DN65;
Aluminum ingot casting machine dimensions: 22 * 2.1 * 2 meters; Rated casting efficiency of 5 tons/hour; Maximum casting speed of 7 tons/hour;
Aluminum ingot dimensions: 680 * 100 * 50mm; Single weight adjustable from 5-6.5kg; Pile size 680 * 680 * 1150mm;
Dimensions of Stacking Machine: 5 * 7 meters
Ash processing machine size: 2.4 * 2.1 * 3.5 meters;
